The Gorman-Rupp Company

Education and Safety :: Pump Safety :: Safety

Submersible Pumps

Never attempt to raise pump by its electrical cord.
Always use a Gorman-Rupp approved control box, mounted in a vertical position.
Always check rotation on 3 phase pumps.
Shut down and lock out all related electrical circuits before performing any maintenance.
Do not hold reset button if overload control trips off. Wait 10 minutes before resetting again.
Never put pump directly on soft, loose bottom.
Be sure to connect pump to correct phase and voltage.
Do not run pump if voltage is not within limits.
Check oil level only when pump has cooled to air temperature.
Use only recommended transformer oil.

Specifications are subject to change. Please contact your Gorman-Rupp Distributor for more details.

The Gorman-Rupp Company
Mansfield Division
P.O. Box 1217
Mansfield, Ohio 44901-1217, USA
Tel: 419-755-1011
Fax: 419-755-1251
E-mail: grsales@gormanrupp.com

The Gorman-Rupp International Company
P.O. Box 1217
Mansfield, Ohio 44901-1217, USA
Tel: 419-755-1011
Fax: 419-755-1266
E-mail: intsales@gormanrupp.com

Gorman-Rupp of Canada, Ltd.
70 Burwell Road
St. Thomas, Ontario N5P 3R7, Canada
Tel: 519-631-2870
Fax: 519-631-4624
E-mail: grcanada@grcanada.com

GRpumps.com