The Gorman-Rupp Company

Education and Safety :: Pump Safety :: Safety

Electric Motor Driven Pumps

Electrocution may occur whenever electricity is present.
Allow only qualified personnel to install, wire and operate pumps and motors.
Always ground electrical units.
Never use gas piping as an electrical ground.
Be sure to connect motor to correct phase and voltage.
Do not operate pump if voltage is not within limits.
If circuit breaker or fuse is tripped, locate and fix the problem before restarting pump.
Make sure all electrical installations are in accordance with National Electrical Code and local codes.
Shut down and lock out all related electrical circuits before performing any maintenance.
Follow motor manufacturer’s recommended operation and maintenance instructions.

Specifications are subject to change. Please contact your Gorman-Rupp Distributor for more details.

The Gorman-Rupp Company
Mansfield Division
P.O. Box 1217
Mansfield, Ohio 44901-1217, USA
Tel: 419-755-1011
Fax: 419-755-1251
E-mail: grsales@gormanrupp.com

The Gorman-Rupp International Company
P.O. Box 1217
Mansfield, Ohio 44901-1217, USA
Tel: 419-755-1011
Fax: 419-755-1266
E-mail: intsales@gormanrupp.com

Gorman-Rupp of Canada, Ltd.
70 Burwell Road
St. Thomas, Ontario N5P 3R7, Canada
Tel: 519-631-2870
Fax: 519-631-4624
E-mail: grcanada@grcanada.com

GRpumps.com